Category Archives: epilators Electrolysis

Electrolysis Hair Removal

May 14, 2012

Electrolysis hair removal is an effective technique to remove hair from the body. this procedure can be used to remove individual hair from almost all parts of the body including eyebrows, face, thighs, abdomen, breasts, and legs. Electrolysis hair removal was developed in 1869 by Charles Michel. since then, many improvements have been made in this technique.

Electrolysis hair removal can provide long term or permanent hair removal. in fact, Food and Drug Administration (FDA) and American Medical Association (AMA) have recognized electrolysis as the only permanent method of removing hair. Needle electrolysis is the most commonly practiced electrolysis hair removal procedure. Electronic tweezers and epilators are also used widely.

In needle electrolysis, a fine needle is inserted into the hair follicle and a gentle electric shock is produced. this electric shock disables the hair root by heat or chemical action or by both. Electrolytic epilators use short-wave radio frequency to destroy hair growth centers. for total and permanent hair removal from a particular area, multiple electrolysis hair removal treatments are required. the total number of sessions needed may vary from person to person. These multiple sessions are carried out on a weekly, biweekly or monthly basis, depending upon the hair growth.

Electrolysis hair removal is painful, but many modern methods have considerably reduced this pain. the use of topical anesthetics can also reduce pain. Electrolysis hair removal procedures are carried out by trained professionals called electrologists in clinics. Many states provide licenses to qualified electrologists.

Electrolysis hair removal is usually a very safe procedure. Generally there are no permanent side effects. the most common side effect is the reddening of the skin during or immediately after treatment, which can last only for a short time. but if done improperly, this procedure can produce partial to full hair regrowth, causing skin damages and infections.

Electrolysis hair removal is a time consuming process and each treatment lasts between 15 minutes and two hour. this procedure is also expensive – the cost varies from $25 to $100 per hour. Because of its high cost and time consuming nature, electrolysis isn’t recommended for larger areas like legs and chest.

0 Comments

New Best Hair Removal Products Site Help Readers With Best Hair Removal Methods and Products

February 8, 2012

Seattle, WA — (SBWIRE) — 02/07/2012 — The new Best Hair Removal Products Site at besthairremoval-products.com has been launched. Specially targeted to internet users seeking an end to their unwanted hair problems, the site provides hair removal articles and product reviews. a wide variety of methods are also discussed. some of the hair removal methods described require professional treatment at a salon or doctor’s office, while others can be done at home by consumers themselves. There are specific articles that include a gender focus when it comes to hair removal, as there are differences in how men and women approach hair removal.According to published market research, hair removal is $1.8 billion marketplace. Everyday, consumers see lots of advertising for various products that promise to end their embarrassing or awkward unwanted hair conditions. it is becoming increasingly difficult for consumers to find what is really suitable and effective for their needs. every individual has his or her own set of desires when it comes to removing their unwanted hair. some stay away from anything that is slightly painful, others prefer chemical-free methods, and yet others want permanent types of hair removal solution.The capacity to make it easy and effective for internet users to find hair removal solutions is a main goal for the Best Hair Removal Products site. For example, the main page lists various hair removal methods and treatment options available that have gotten great approval from existing users. these include hair removal methods like tweezing, waxing, sugaring, depilatories, laser therapy, electrolysis and more. The various products and methods described and reviewed differ in their history and approach, offering a range of choices for its readers. it also discusses hair removal on different areas of the body, such as upper lip hair removal, chin hair, other facial hair, underarm hair, back hair, eyebrow hair, leg hair removal and other areas. Readers are encouraged to check them out carefully and decide which could work best for their needs.About BestHairRemoval-Products.comThe Best Hair Removal Products site provides articles and reviews that are suitable for both women and men. The focus of hair removal differs for men and women. For example, men may be more concerned with body and back hair removal, whereas women are more concerned with facial and underarm hair removal. Readers can check out specific articles that are tailored to their gender and area of focus. Interested reader can visit the website at:besthairremoval-products.com/

0 Comments

How Much Does Hair Electrolysis Cost?

November 2, 2011

Hair electrolysis is a cosmetic procedure that involves removing unwanted body hair. Since it’s considered cosmetic, insurance rarely covers the procedure and the patient is usually responsible for footing the bill. This is a problem for some because hair electrolysis costs can be quite high.

Hair electrolysis prices depend on a number of different factors, such as geographic location, area of the body to be treated, total number of treatments needed, and the experience level of the physician. Depending on the variables the cost can range from $50 to $500 per treatment, sometimes more.

Electrolysis costs are most dependent on the area of the body to be treated. Generally, the larger the surface area, the more the treatment will cost. For instance, having the hair removed from your back will cost more than your arms, but your arms will cost more than your chin. the main reason why larger areas cost more is because they take longer to treat.

The coarseness and thickness of the patient’s hair may also reflect the price. the thicker it is, the longer it will take to remove, resulting in lengthy treatments, multiple treatments and a higher bill. if you have hair like that, you can expect that your total costs will be on the higher end.

When you receive an electrolysis cost consultation and the physician gives you an estimate, keep in mind that until treatments begin there’s no real way of knowing how your body will respond to treatment. You may lose hair with more difficulty than the physician expected, resulting in the need for additional treatments. Remember, an estimate on how many treatments you’ll need is just that – an estimate. It’s possible that the final cost could be much higher.

The amount that hair electrolysis will ultimately cost you depends on so many factors that it’s very difficult to put a price on. For someone with thinner, less coarse hair their total treatment might cost less than $1,000. However, a person with very thick hair that requires long sessions and many follow up appointments could run a bill over $10,000. the bottom line is electrolysis costs vary greatly and are never final until you’ve received your last treatment.

0 Comments

What is this electrolysis device like?

September 10, 2011

cgi.ebay.com/ONE-TOUCH-HOME-ELECT…

Have you used this device? if so does it work? what are the side effects?

I recently bought one on ebay & once it arrives in the mail Im gonna get my pubes removed permanently.

I agree. It looks pretty cheap. but you can have electrolysis done by a professional if you really want it to be done. BEAR IN MIND: it's not reversible, so if you don't like it, you're stuck with it.

So, you buy something over the Internet that will come dangerously close to your privates, and then you ask our opinion AFTER you buy it? What's wrong with this picture?

0 Comments

Electrolysis: A Safe, Effective Hair Removal Treatment

August 25, 2011

Electrolysis, a proven treatment for removing unwanted body hair, has been around for over a hundred years. anyone can undergo electrolysis. a common misconception about electrolysis is that it is painful.

The treatment may cause some discomfort, such as warm sensations, reddening of the skin or slight swelling, but electrolysis is really a relatively painless procedure. The reddening or slight swelling of the area where electrolysis was performed usually disappears after a few hours.

Even though electrolysis is a painless and simple hair removal treatment, there are still some things to consider before it can be undertaken. Electrolysis is a regulated hair removal treatment in most states. Thus, if you decide to undergo the treatment, you need to seek the services of a qualified and licensed electrolysis technician. Depending on the amount of unwanted hair you have, you may need to go back for several electrolysis treatments so you need to find someone who knows exactly what he or she is doing.

For many, electrolysis seems to be an extreme way of removing unwanted hair. In general, though, electrolysis is more effective than other hair removal methods such as shaving cream and razor, hair removal creams and hot wax. With shaving cream and razor, you’re bound to miss a spot or have scars.

Hair removal creams will leave you smelly. And unless you’re a masochist, hot wax could burn your skin. Electrolysis, on the other hand, is the safer, more effective alternative. In just a few treatments (and a little discomfort), you can say goodbye to all your unwanted hair forever.

0 Comments

Electrolysis Redox Made Simple

August 16, 2011

The term electrolysis redox refers to the chemical reactions that occur when electrons are exchanged. Electrolysis redox involves matching an electron accepted via reduction with one that is donated via oxidation. there are many different types of electrolysis redox reactions. One such reaction is a synthesis reaction involving an exchange of electrons that results in the creation of an ionic bond.

Different Examples of Electrolysis Redox

One illustration of electrolysis redox occurs when the incorporation of a single element into a compound results in another single element being released from the compound as a free element.

This also holds true for double replacement of elements within a compound, as opposed to the described single element reaction. Additionally, when a compound is divided into elements as a result of decomposition, the reaction is an example of electrolysis redox. the electrolysis of water is also an example of electrolysis redox.

Characteristics of Electrolysis Redox

The defining characteristic of electrolysis redox is that there must be at least one atom released of at least one type of atom to another type of atom that accepts electrons. An electrolysis redox reaction always results in a change of the oxidation number on either the reactant or product side of the equation. This is the primary means for determining if a reaction is an example of an electrolysis redox reaction.

Non-spontaneous Electrolysis Redox Reactions

When an electrolysis redox is not spontaneous, an external source has to exert a potential greater than that of the cell potential. To bring about a non-spontaneous electrolysis redox reaction, a supply of necessary potential is used to facilitate and electrolysis redox reaction.

Ion-Electron Electrolysis Redox
When electrolysis redox reactions need to be balanced, one can use the ion-electron method This process involves reversing the direction of an electrolysis redox reaction by with an electric current. In this case, when the electric current is passed through a reaction mixture, electrolysis redox occurs.

Learning More about Electrolysis Redox

To develop a full understanding of electrolysis redox, it is necessary to undertake advanced chemistry study. Studying animations is very useful for developing a deeper understanding of what electrolysis redox reactions are and the process of how they occur.
You can seek additional information about electrolysis redox via a chemistry book, online course, or college-level chemistry class. Reading about Hess’s Law is one of the first recommendations for becoming more knowledgeable about the subject of electrolysis redox.

0 Comments

I'm thinking of doing electrolysis, I already bought the "One Touch" kind.?

July 28, 2011

It's still being shipped, I bought it from eBay, and luckily it's new.

I read a lot about it from tsroadmap.com, which is pretty much the most information I could get.

Now I'll just need a guide/planner, and directions.

[How do I do this? What's the process?]
I was confused, for the "one Touch Pen" do I slip the needle into the follicle along side with the hair, zap it, and then pluck the hair. or do I pluck the hair out first?

And I heard it's best to start out on the face first, since it won't hurt as much as body hairs.

[My physical info]
– I'm 18 and almost 19, bday is in January
– I'm a MTF(male to female) transgender, who didn't do any kind of hormones yet
– I did intake lots of tofu and soy products for a few years, since I heard it has amounts of estrogen(not that much tho)
– I don't have any skin problems/diseases, except that I have pimples, mostly on my back.
– I've been plucking hair on my chin for like 2 years, it became a habit, the hair on my chin doesn't hurt at all, should I start doing electrolysis on this area?
– I'm unhealthy, because I don't have PE anymore, and I don't exercise that often. And maybe a few extra pounds.

I'm currently still in high school as a senior, most of my friends already knows me as a TG, if I was to be more feminine they wouldn't mind.

So does anyone have any suggests and guides, on what I'll do, once it arrives in my mail? I'm also not experienced with these kinds of tools, so please explain that too.

And yes, I'm well aware of the timing, I heard it CAN take up to like 5 years/2000hours+. I don't care about time, I've been struggling to become feminine ever since 5th grade, I do care about the effect and safeness from electrolysis.

0 Comments

Brazilian Electrolysis – Combining A Vacation Adventure With Electrolysis

July 23, 2011

When bathing suit season rolls around, it’s time to get in shape for short-shorts, swimsuits, and sun dresses. Hair removal becomes an primary concern as the seasons change and you can’t hide your hairy legs (and other body parts!) under layers of thick winter clothing.

One of the best ways to welcome in all that the summer season has to offer is to go Brazilian! Get a head start on summer with a trip to beautiful sunny Brazil, and enjoy the latest in Brazilian electrolysis treatments while you are there. more and more people are heading to Brazil to combine a fun in the sun get away with the top-notch Brazilian electrolysis procedures offered at one of the countries high quality salons.

Brazil has a reputation for being on of the best locations for receiving the ultimate electrolysis treatments for permanent hair removal. Think about it. The climate in Brazil is conducive to wearing bikinis year-round. Who better to perfect the art of electrolysis than skin care professionals in a country where skin is always on display?

How Does Brazilian Electrolysis Work?

When you decided to have Brazilian electrolysis, of course your first step will be to get yourself to Brazil! there are a number of travel firms in North America who specialize in putting together Brazilian vacation packaged centered around spa and cosmetic procedures.

Your Brazilian electrolysis procedure will begin with a consultation with a highly trained skin care professional. your Brazilian electrolysis provider might be a certified beautician, skin care professional, or even a medical doctor. during the initial consultation, you and your Brazilian electrolysis professional will discuss your needs and goals for Brazilian electrolysis.

Once the professional is informed about your skin type, the type of hair, and the quantity of hair that you want to have permanently removed, discussions can turn to cost and the number of treatments needed to bring about the results you would like. Some Brazilian electrolysis treatments can be completed with just one visit. However, in cases where the hair is very coarse or the affected area is particularly large, additional treatments, which will impact the cost, might be required.

Brazilian electrolysis professionals typically use the newest technology for hair removal. Just like in other countries, Brazilian electrolysis providers adhere to high standards of safety and service.

Immediately following your Brazilian electrolysis treatment, your skin may be somewhat sensitive. The level of discomfort varies from person to person, and is related to a person’s level of skin sensitivity. Those with very sensitive skin are likely to experience more tenderness in the affected areas than those whose skin is not very sensitive.

However, once the sensitivity has passes, the results of your Brazilian electrolysis treatment will help you look your best at all times, with out having to hassle with shaving or other ongoing methods of hair removal. Enjoy the rest of your trip to Brazil, and show off your beautiful body that is free of unwanted hair on the beautiful Brazilian beaches!

0 Comments

What is the total time and cost for male facial electrolysis?

June 30, 2011

A general online consensus says between 100-400 hours. if you multiply that by $65, that's $6500! I was just wondering if any males have actually undergone facial hair removal via electrolysis. how much did it end up costing you and how long did it take? Electrologists who have worked on males feel free to answer.

0 Comments

defence.professionals

June 26, 2011

14:25 GMT, June 20, 2011 Galvanic corrosion is an issue that has challenged U.S. warships since 1844, when the USS Michigan, the first iron-hulled Navy ship, entered service. Today, two common and robust solutions, impressed current cathodic protection systems and the use of strategically-placed sacrificial anodes, are in wide use throughout the world, particularly in ships where two different metals such as steel and aluminum are utilised in the one vessel. As a specialist in aluminum shipbuilding, having built over 220 aluminum vessels for defence forces and commercial clients around the world since its formation in 1988, Austal is intimately familiar with the management of galvanic corrosion. an electrochemical process, galvanic corrosion occurs when two dissimilar metals, after being in electrical contact with one another, corrode at different rates. according to company records, galvanic corrosion has not been a factor on any Austal built and fully maintained vessel, and our technical experts are eager to support any request to identify root causes of any corrosion issue in any aluminum naval vessel in service today. the Westpac Express, an Austal-built and fully maintained high-speed catamaran, has shuttled U.S. Marines throughout the Pacific Basin continuously for ten years, with a 99.7% availability over that period. As Prime Contractor for Jackson, the third Independence-variant Littoral Combat Ship (LCS-6), Austal has a well-developed methodology for the management of galvanic corrosion, which it has deployed globally on behalf of its defense and commercial clients. If selected to provide post-delivery support for the Littoral Combat Ship (LCS) Class Services program, it is a straight forward process for Austal engineers to regularly conduct systematic reviews of the electrical grounding throughout each Austal-built vessel to detect and eliminate stray currents that might cause electrolysis between the stainless steel impeller housing and of the adjacent aluminum structure. an integral part of any post-delivery support program for a high-performance, high-speed vessel such as the Independence-variant LCS is to provide a cadre of qualified maintainers who can help our Navy partners to deploy temporary sacrificial anodes every time the vessel is moored, and ensure that high-voltage maintenance equipment is properly grounded before use aboard ship. These are services that Austal’s skilled aluminum specialists, operating from six maintenance hubs in the Asia-Pacific, North America, South America, Europe and the Middle East, offer Austal customers every day. with almost 2,200 current employees at Austal’s USA shipyard, with a future workforce planned of over 4,000, each and every Austal employee is committed to making the Littoral Combat Ship a success. Awarded a ten-ship contract in December 2010, Austal has eagerly assumed the role of Prime Contractor for the Independence-variant Littoral Combat Ships awarded under the 10 ship block buy contract, and, as a Prime Contractor for those 10 ships, Austal will always stand by its products and our Navy partners.  

0 Comments
« Older posts